İsteklerin sistem tarafından işlenmesi için bir API anahtarı gereklidir. Bir kullanıcı kaydolduğunda, bu kullanıcı için otomatik olarak bir API anahtarı oluşturulur. API anahtarı her istekle birlikte gönderilmelidir (aşağıdaki tam örneğe bakın). API anahtarı gönderilmezse veya süresi dolmuşsa bir hata olacaktır. Kötüye kullanımı önlemek için lütfen API anahtarınızı gizli tuttuğunuzdan emin olun.
API sistemiyle kimlik doğrulaması yapmak için API anahtarınızı her istekle birlikte bir yetkilendirme belirteci olarak göndermeniz gerekir. Aşağıda örnek kodu görebilirsiniz.
curl --location --request POST 'https://linkplea.se/api/account' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \ $curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkplea.se/api/account",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "POST",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
));
$response = curl_exec($curl);var request = require('request');
var options = {
'method': 'POST',
'url': 'https://linkplea.se/api/account',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
body: ''
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://linkplea.se/api/account"
payload = {}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("GET", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Get, "https://linkplea.se/api/account");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
API'miz, kararlılığını en üst düzeye çıkarmak için isteklerdeki ani artışlara karşı koruma sağlayan bir hız sınırlayıcıya sahiptir. Hız sınırlayıcımız şu anda 1 dakika başına 30 istekle sınırlandırılmıştır. Please note that the rate might change according to the subscribed plan.
Yanıtın yanında birkaç başlık gönderilir ve bunlar istekle ilgili çeşitli bilgileri belirlemek için incelenebilir.
X-RateLimit-Limit: 30
X-RateLimit-Remaining: 29
X-RateLimit-Reset: TIMESTAMP
Tüm API yanıtı, varsayılan olarak JSON biçiminde döndürülür. Bunu kullanılabilir verilere dönüştürmek için dile göre uygun işlevin kullanılması gerekecektir. PHP'de, json_decode() işlevi, verileri bir nesneye (varsayılan) veya bir diziye (ikinci parametreyi true olarak ayarlayın) dönüştürmek için kullanılabilir. Hata anahtarının kontrol edilmesi bir hata olup olmadığı hakkında bilgi verdiği için çok önemlidir. Başlık kodunu da kontrol edebilirsiniz.
{
"error": 1,
"message": "An error occurred"
}https://linkplea.se/api/urls?limit=2&page=1&order=date
Bağlantılarınızı API aracılığıyla almak için bu uç noktayı kullanabilirsiniz. Ayrıca verileri filtreleyebilirsiniz (Daha fazla bilgi için tabloya bakın).
| Parametre | Açıklama |
|---|---|
| limit | (optional) Per page data result |
| page | (optional) Current page request |
| order | (optional) Sort data between date or click |
| short | (optional) Search using the short url. Note that when you use the short parameter, all other parameters are ignored and if there is a match a Single Link response will be returned. |
| q | (optional) Search for links using a keyword |
curl --location --request GET 'https://linkplea.se/api/urls?limit=2&page=1&order=date' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkplea.se/api/urls?limit=2&page=1&order=date",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'GET',
'url': 'https://linkplea.se/api/urls?limit=2&page=1&order=date',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://linkplea.se/api/urls?limit=2&page=1&order=date"
payload = {}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("GET", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Get, "https://linkplea.se/api/urls?limit=2&page=1&order=date");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": "0",
"data": {
"result": 2,
"perpage": 2,
"currentpage": 1,
"nextpage": 1,
"maxpage": 1,
"urls": [
{
"id": 2,
"alias": "google",
"shorturl": "https:\/\/linkplea.se\/google",
"longurl": "https:\/\/google.com",
"clicks": 0,
"title": "Google",
"description": "",
"date": "2020-11-10 18:01:43"
},
{
"id": 1,
"alias": "googlecanada",
"shorturl": "https:\/\/linkplea.se\/googlecanada",
"longurl": "https:\/\/google.ca",
"clicks": 0,
"title": "Google Canada",
"description": "",
"date": "2020-11-10 18:00:25"
}
]
}
}https://linkplea.se/api/url/:id
API aracılığıyla tek bir bağlantının ayrıntılarını almak için bu uç noktayı kullanabilirsiniz.
curl --location --request GET 'https://linkplea.se/api/url/:id' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkplea.se/api/url/:id",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'GET',
'url': 'https://linkplea.se/api/url/:id',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://linkplea.se/api/url/:id"
payload = {}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("GET", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Get, "https://linkplea.se/api/url/:id");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"id": 1,
"details": {
"id": 1,
"shorturl": "https:\/\/linkplea.se\/googlecanada",
"longurl": "https:\/\/google.com",
"title": "Google",
"description": "",
"location": {
"canada": "https:\/\/google.ca",
"united states": "https:\/\/google.us"
},
"device": {
"iphone": "https:\/\/google.com",
"android": "https:\/\/google.com"
},
"expiry": null,
"date": "2020-11-10 18:01:43"
},
"data": {
"clicks": 0,
"uniqueClicks": 0,
"topCountries": 0,
"topReferrers": 0,
"topBrowsers": 0,
"topOs": 0,
"socialCount": {
"facebook": 0,
"twitter": 0,
"google": 0
}
}
}https://linkplea.se/api/url/add
Bir bağlantıyı kısaltmak için, bir POST isteği aracılığıyla JSON'da geçerli bir veri göndermeniz gerekir. Veriler, aşağıda gösterildiği gibi isteğinizin ham gövdesi olarak gönderilmelidir. Aşağıdaki örnek, gönderebileceğiniz tüm parametreleri gösterir, ancak hepsini göndermeniz gerekmez (Daha fazla bilgi için tabloya bakın).
| Parametre | Açıklama |
|---|---|
| url | (required) Long URL to shorten. |
| custom | (optional) Custom alias instead of random alias. |
| type | (optional) Redirection type [direct, frame, splash], only id for custom splash page or overlay-id for cta pages |
| password | (optional) Password protection |
| domain | (optional) Custom Domain |
| expiry | (optional) Expiration for the link example 2021-09-28 23:11:16 |
| geotarget | (optional) Geo targeting data |
| devicetarget | (optional) Device targeting data |
| languagetarget | (optional) Language targeting data |
| metatitle | (optional) Meta title |
| metadescription | (optional) Meta description |
| metaimage | (optional) Link to a jpg or png image |
| description | (optional) Note or description |
| pixels | (optional) Array of pixel ids |
| channel | (optional) Channel ID |
| campaign | (optional) Campaign ID |
| deeplink | (optional) Object containing app store links. When using this, it is important to set device targeting as well. (New) You can now set the parameter "auto" to true to automatically generate the deep links from provided long link. |
| status | (optional) public or private (default) |
curl --location --request POST 'https://linkplea.se/api/url/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"url": "https:\/\/google.com",
"status": "private",
"custom": "google",
"password": "mypass",
"expiry": "2020-11-11 12:00:00",
"type": "splash",
"metatitle": "Not Google",
"metadescription": "Not Google description",
"metaimage": "https:\/\/www.mozilla.org\/media\/protocol\/img\/logos\/firefox\/browser\/og.4ad05d4125a5.png",
"description": "For facebook",
"pixels": [
1,
2,
3,
4
],
"channel": 1,
"campaign": 1,
"deeplink": {
"auto": true,
"apple": "https:\/\/apps.apple.com\/us\/app\/google\/id284815942",
"google": "https:\/\/play.google.com\/store\/apps\/details?id=com.google.android.googlequicksearchbox&hl=en_CA&gl=US"
},
"geotarget": [
{
"location": "Canada",
"link": "https:\/\/google.ca"
},
{
"location": "United States",
"link": "https:\/\/google.us"
}
],
"devicetarget": [
{
"device": "iPhone",
"link": "https:\/\/google.com"
},
{
"device": "Android",
"link": "https:\/\/google.com"
}
],
"languagetarget": [
{
"language": "en",
"link": "https:\/\/google.com"
},
{
"language": "fr",
"link": "https:\/\/google.ca"
}
],
"parameters": [
{
"name": "aff",
"value": "3"
},
{
"device": "gtm_source",
"link": "api"
}
]
}'$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkplea.se/api/url/add",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "POST",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
CURLOPT_POSTFIELDS =>
'{
"url": "https:\/\/google.com",
"status": "private",
"custom": "google",
"password": "mypass",
"expiry": "2020-11-11 12:00:00",
"type": "splash",
"metatitle": "Not Google",
"metadescription": "Not Google description",
"metaimage": "https:\/\/www.mozilla.org\/media\/protocol\/img\/logos\/firefox\/browser\/og.4ad05d4125a5.png",
"description": "For facebook",
"pixels": [
1,
2,
3,
4
],
"channel": 1,
"campaign": 1,
"deeplink": {
"auto": true,
"apple": "https:\/\/apps.apple.com\/us\/app\/google\/id284815942",
"google": "https:\/\/play.google.com\/store\/apps\/details?id=com.google.android.googlequicksearchbox&hl=en_CA&gl=US"
},
"geotarget": [
{
"location": "Canada",
"link": "https:\/\/google.ca"
},
{
"location": "United States",
"link": "https:\/\/google.us"
}
],
"devicetarget": [
{
"device": "iPhone",
"link": "https:\/\/google.com"
},
{
"device": "Android",
"link": "https:\/\/google.com"
}
],
"languagetarget": [
{
"language": "en",
"link": "https:\/\/google.com"
},
{
"language": "fr",
"link": "https:\/\/google.ca"
}
],
"parameters": [
{
"name": "aff",
"value": "3"
},
{
"device": "gtm_source",
"link": "api"
}
]
}',
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'POST',
'url': 'https://linkplea.se/api/url/add',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
body: JSON.stringify({
"url": "https:\/\/google.com",
"status": "private",
"custom": "google",
"password": "mypass",
"expiry": "2020-11-11 12:00:00",
"type": "splash",
"metatitle": "Not Google",
"metadescription": "Not Google description",
"metaimage": "https:\/\/www.mozilla.org\/media\/protocol\/img\/logos\/firefox\/browser\/og.4ad05d4125a5.png",
"description": "For facebook",
"pixels": [
1,
2,
3,
4
],
"channel": 1,
"campaign": 1,
"deeplink": {
"auto": true,
"apple": "https:\/\/apps.apple.com\/us\/app\/google\/id284815942",
"google": "https:\/\/play.google.com\/store\/apps\/details?id=com.google.android.googlequicksearchbox&hl=en_CA&gl=US"
},
"geotarget": [
{
"location": "Canada",
"link": "https:\/\/google.ca"
},
{
"location": "United States",
"link": "https:\/\/google.us"
}
],
"devicetarget": [
{
"device": "iPhone",
"link": "https:\/\/google.com"
},
{
"device": "Android",
"link": "https:\/\/google.com"
}
],
"languagetarget": [
{
"language": "en",
"link": "https:\/\/google.com"
},
{
"language": "fr",
"link": "https:\/\/google.ca"
}
],
"parameters": [
{
"name": "aff",
"value": "3"
},
{
"device": "gtm_source",
"link": "api"
}
]
}),
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://linkplea.se/api/url/add"
payload = {
"url": "https://google.com",
"status": "private",
"custom": "google",
"password": "mypass",
"expiry": "2020-11-11 12:00:00",
"type": "splash",
"metatitle": "Not Google",
"metadescription": "Not Google description",
"metaimage": "https://www.mozilla.org/media/protocol/img/logos/firefox/browser/og.4ad05d4125a5.png",
"description": "For facebook",
"pixels": [
1,
2,
3,
4
],
"channel": 1,
"campaign": 1,
"deeplink": {
"auto": true,
"apple": "https://apps.apple.com/us/app/google/id284815942",
"google": "https://play.google.com/store/apps/details?id=com.google.android.googlequicksearchbox&hl=en_CA&gl=US"
},
"geotarget": [
{
"location": "Canada",
"link": "https://google.ca"
},
{
"location": "United States",
"link": "https://google.us"
}
],
"devicetarget": [
{
"device": "iPhone",
"link": "https://google.com"
},
{
"device": "Android",
"link": "https://google.com"
}
],
"languagetarget": [
{
"language": "en",
"link": "https://google.com"
},
{
"language": "fr",
"link": "https://google.ca"
}
],
"parameters": [
{
"name": "aff",
"value": "3"
},
{
"device": "gtm_source",
"link": "api"
}
]
}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("POST", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Post, "https://linkplea.se/api/url/add");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{
"url": "https:\/\/google.com",
"status": "private",
"custom": "google",
"password": "mypass",
"expiry": "2020-11-11 12:00:00",
"type": "splash",
"metatitle": "Not Google",
"metadescription": "Not Google description",
"metaimage": "https:\/\/www.mozilla.org\/media\/protocol\/img\/logos\/firefox\/browser\/og.4ad05d4125a5.png",
"description": "For facebook",
"pixels": [
1,
2,
3,
4
],
"channel": 1,
"campaign": 1,
"deeplink": {
"auto": true,
"apple": "https:\/\/apps.apple.com\/us\/app\/google\/id284815942",
"google": "https:\/\/play.google.com\/store\/apps\/details?id=com.google.android.googlequicksearchbox&hl=en_CA&gl=US"
},
"geotarget": [
{
"location": "Canada",
"link": "https:\/\/google.ca"
},
{
"location": "United States",
"link": "https:\/\/google.us"
}
],
"devicetarget": [
{
"device": "iPhone",
"link": "https:\/\/google.com"
},
{
"device": "Android",
"link": "https:\/\/google.com"
}
],
"languagetarget": [
{
"language": "en",
"link": "https:\/\/google.com"
},
{
"language": "fr",
"link": "https:\/\/google.ca"
}
],
"parameters": [
{
"name": "aff",
"value": "3"
},
{
"device": "gtm_source",
"link": "api"
}
]
}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"id": 3,
"shorturl": "https:\/\/linkplea.se\/google"
}https://linkplea.se/api/url/:id/update
Bir bağlantıyı güncellemek için, bir PUT isteği aracılığıyla JSON'da geçerli bir veri göndermeniz gerekir. Veriler, aşağıda gösterildiği gibi isteğinizin ham gövdesi olarak gönderilmelidir. Aşağıdaki örnek, gönderebileceğiniz tüm parametreleri gösterir, ancak hepsini göndermeniz gerekmez (Daha fazla bilgi için tabloya bakın).
| Parametre | Açıklama |
|---|---|
| url | (required) Long URL to shorten. |
| custom | (optional) Custom alias instead of random alias. |
| type | (optional) Redirection type [direct, frame, splash] |
| password | (optional) Password protection |
| domain | (optional) Custom Domain |
| expiry | (optional) Expiration for the link example 2021-09-28 23:11:16 |
| geotarget | (optional) Geo targeting data |
| devicetarget | (optional) Device targeting data |
| languagetarget | (optional) Language targeting data |
| metatitle | (optional) Meta title |
| metadescription | (optional) Meta description |
| metaimage | (optional) Link to a jpg or png image |
| pixels | (optional) Array of pixel ids |
| channel | (optional) Channel ID |
| campaign | (optional) Campaign ID |
| deeplink | (optional) Object containing app store links. When using this, it is important to set device targeting as well. |
curl --location --request PUT 'https://linkplea.se/api/url/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"url": "https:\/\/google.com",
"custom": "google",
"password": "mypass",
"expiry": "2020-11-11 12:00:00",
"type": "splash",
"pixels": [
1,
2,
3,
4
],
"channel": 1,
"deeplink": {
"apple": "https:\/\/apps.apple.com\/us\/app\/google\/id284815942",
"google": "https:\/\/play.google.com\/store\/apps\/details?id=com.google.android.googlequicksearchbox&hl=en_CA&gl=US"
},
"geotarget": [
{
"location": "Canada",
"link": "https:\/\/google.ca"
},
{
"location": "United States",
"link": "https:\/\/google.us"
}
],
"devicetarget": [
{
"device": "iPhone",
"link": "https:\/\/google.com"
},
{
"device": "Android",
"link": "https:\/\/google.com"
}
],
"parameters": [
{
"name": "aff",
"value": "3"
},
{
"device": "gtm_source",
"link": "api"
}
]
}'$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkplea.se/api/url/:id/update",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "PUT",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
CURLOPT_POSTFIELDS =>
'{
"url": "https:\/\/google.com",
"custom": "google",
"password": "mypass",
"expiry": "2020-11-11 12:00:00",
"type": "splash",
"pixels": [
1,
2,
3,
4
],
"channel": 1,
"deeplink": {
"apple": "https:\/\/apps.apple.com\/us\/app\/google\/id284815942",
"google": "https:\/\/play.google.com\/store\/apps\/details?id=com.google.android.googlequicksearchbox&hl=en_CA&gl=US"
},
"geotarget": [
{
"location": "Canada",
"link": "https:\/\/google.ca"
},
{
"location": "United States",
"link": "https:\/\/google.us"
}
],
"devicetarget": [
{
"device": "iPhone",
"link": "https:\/\/google.com"
},
{
"device": "Android",
"link": "https:\/\/google.com"
}
],
"parameters": [
{
"name": "aff",
"value": "3"
},
{
"device": "gtm_source",
"link": "api"
}
]
}',
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'PUT',
'url': 'https://linkplea.se/api/url/:id/update',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
body: JSON.stringify({
"url": "https:\/\/google.com",
"custom": "google",
"password": "mypass",
"expiry": "2020-11-11 12:00:00",
"type": "splash",
"pixels": [
1,
2,
3,
4
],
"channel": 1,
"deeplink": {
"apple": "https:\/\/apps.apple.com\/us\/app\/google\/id284815942",
"google": "https:\/\/play.google.com\/store\/apps\/details?id=com.google.android.googlequicksearchbox&hl=en_CA&gl=US"
},
"geotarget": [
{
"location": "Canada",
"link": "https:\/\/google.ca"
},
{
"location": "United States",
"link": "https:\/\/google.us"
}
],
"devicetarget": [
{
"device": "iPhone",
"link": "https:\/\/google.com"
},
{
"device": "Android",
"link": "https:\/\/google.com"
}
],
"parameters": [
{
"name": "aff",
"value": "3"
},
{
"device": "gtm_source",
"link": "api"
}
]
}),
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://linkplea.se/api/url/:id/update"
payload = {
"url": "https://google.com",
"custom": "google",
"password": "mypass",
"expiry": "2020-11-11 12:00:00",
"type": "splash",
"pixels": [
1,
2,
3,
4
],
"channel": 1,
"deeplink": {
"apple": "https://apps.apple.com/us/app/google/id284815942",
"google": "https://play.google.com/store/apps/details?id=com.google.android.googlequicksearchbox&hl=en_CA&gl=US"
},
"geotarget": [
{
"location": "Canada",
"link": "https://google.ca"
},
{
"location": "United States",
"link": "https://google.us"
}
],
"devicetarget": [
{
"device": "iPhone",
"link": "https://google.com"
},
{
"device": "Android",
"link": "https://google.com"
}
],
"parameters": [
{
"name": "aff",
"value": "3"
},
{
"device": "gtm_source",
"link": "api"
}
]
}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("PUT", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Put, "https://linkplea.se/api/url/:id/update");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{
"url": "https:\/\/google.com",
"custom": "google",
"password": "mypass",
"expiry": "2020-11-11 12:00:00",
"type": "splash",
"pixels": [
1,
2,
3,
4
],
"channel": 1,
"deeplink": {
"apple": "https:\/\/apps.apple.com\/us\/app\/google\/id284815942",
"google": "https:\/\/play.google.com\/store\/apps\/details?id=com.google.android.googlequicksearchbox&hl=en_CA&gl=US"
},
"geotarget": [
{
"location": "Canada",
"link": "https:\/\/google.ca"
},
{
"location": "United States",
"link": "https:\/\/google.us"
}
],
"devicetarget": [
{
"device": "iPhone",
"link": "https:\/\/google.com"
},
{
"device": "Android",
"link": "https:\/\/google.com"
}
],
"parameters": [
{
"name": "aff",
"value": "3"
},
{
"device": "gtm_source",
"link": "api"
}
]
}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"id": 3,
"short": "https:\/\/linkplea.se\/google"
}https://linkplea.se/api/url/:id/delete
Bir bağlantıyı silmek için bir DELETE isteği göndermeniz gerekir.
curl --location --request DELETE 'https://linkplea.se/api/url/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkplea.se/api/url/:id/delete",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "DELETE",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'DELETE',
'url': 'https://linkplea.se/api/url/:id/delete',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://linkplea.se/api/url/:id/delete"
payload = {}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("DELETE", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Delete, "https://linkplea.se/api/url/:id/delete");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"message": "Link has been deleted successfully"
}https://linkplea.se/api/overlay?limit=2&page=1
To get cta overlays via the API, you can use this endpoint. You can also filter data (See table for more info).
| Parametre | Açıklama |
|---|---|
| limit | (optional) Per page data result |
| page | (optional) Current page request |
curl --location --request GET 'https://linkplea.se/api/overlay?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkplea.se/api/overlay?limit=2&page=1",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'GET',
'url': 'https://linkplea.se/api/overlay?limit=2&page=1',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://linkplea.se/api/overlay?limit=2&page=1"
payload = {}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("GET", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Get, "https://linkplea.se/api/overlay?limit=2&page=1");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": "0",
"data": {
"result": 2,
"perpage": 2,
"currentpage": 1,
"nextpage": 1,
"maxpage": 1,
"cta": [
{
"id": 1,
"type": "message",
"name": "Product 1 Promo",
"date": "2020-11-10 18:00:00"
},
{
"id": 2,
"type": "contact",
"name": "Contact Page",
"date": "2020-11-10 18:10:00"
}
]
}
}https://linkplea.se/api/account
Hesapla ilgili bilgi almak için bu uç noktaya bir istek gönderebilirsiniz ve bu, hesapla ilgili verileri döndürür.
curl --location --request GET 'https://linkplea.se/api/account' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkplea.se/api/account",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'GET',
'url': 'https://linkplea.se/api/account',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://linkplea.se/api/account"
payload = {}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("GET", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Get, "https://linkplea.se/api/account");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"data": {
"id": 1,
"email": "sample@domain.com",
"username": "sampleuser",
"avatar": "https:\/\/domain.com\/content\/avatar.png",
"status": "pro",
"expires": "2022-11-15 15:00:00",
"registered": "2020-11-10 18:01:43"
}
}https://linkplea.se/api/account/update
Hesapla ilgili bilgileri güncellemek için bu uç noktaya bir istek gönderebilirsiniz; bu, hesaptaki verileri güncelleyecektir.
curl --location --request PUT 'https://linkplea.se/api/account/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"email": "newemail@google.com",
"password": "newpassword"
}'$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkplea.se/api/account/update",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "PUT",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
CURLOPT_POSTFIELDS =>
'{
"email": "newemail@google.com",
"password": "newpassword"
}',
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'PUT',
'url': 'https://linkplea.se/api/account/update',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
body: JSON.stringify({
"email": "newemail@google.com",
"password": "newpassword"
}),
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://linkplea.se/api/account/update"
payload = {
"email": "newemail@google.com",
"password": "newpassword"
}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("PUT", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Put, "https://linkplea.se/api/account/update");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{
"email": "newemail@google.com",
"password": "newpassword"
}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"message": "Account has been successfully updated."
}https://linkplea.se/api/channels?limit=2&page=1
To get your channels via the API, you can use this endpoint. You can also filter data (See table for more info).
| Parametre | Açıklama |
|---|---|
| limit | (optional) Per page data result |
| page | (optional) Current page request |
curl --location --request GET 'https://linkplea.se/api/channels?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkplea.se/api/channels?limit=2&page=1",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'GET',
'url': 'https://linkplea.se/api/channels?limit=2&page=1',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://linkplea.se/api/channels?limit=2&page=1"
payload = {}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("GET", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Get, "https://linkplea.se/api/channels?limit=2&page=1");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": "0",
"data": {
"result": 2,
"perpage": 2,
"currentpage": 1,
"nextpage": 1,
"maxpage": 1,
"channels": [
{
"id": 1,
"name": "Channel 1",
"description": "Description of channel 1",
"color": "#000000",
"starred": true
},
{
"id": 2,
"name": "Channel 2",
"description": "Description of channel 2",
"color": "#FF0000",
"starred": false
}
]
}
}https://linkplea.se/api/channel/:id?limit=1&page=1
To get items in a select channels via the API, you can use this endpoint. You can also filter data (See table for more info).
| Parametre | Açıklama |
|---|---|
| limit | (optional) Per page data result |
| page | (optional) Current page request |
curl --location --request GET 'https://linkplea.se/api/channel/:id?limit=1&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkplea.se/api/channel/:id?limit=1&page=1",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'GET',
'url': 'https://linkplea.se/api/channel/:id?limit=1&page=1',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://linkplea.se/api/channel/:id?limit=1&page=1"
payload = {}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("GET", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Get, "https://linkplea.se/api/channel/:id?limit=1&page=1");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": "0",
"data": {
"result": 2,
"perpage": 2,
"currentpage": 1,
"nextpage": 1,
"maxpage": 1,
"items": [
{
"type": "links",
"id": 1,
"title": "My Sample Link",
"preview": "https:\/\/google.com",
"link": "https:\/\/linkplea.se\/google",
"date": "2022-05-12"
},
{
"type": "bio",
"id": 1,
"title": "My Sample Bio",
"preview": "https:\/\/linkplea.se\/mybio",
"link": "https:\/\/linkplea.se\/mybio",
"date": "2022-06-01"
}
]
}
}https://linkplea.se/api/channel/add
A channel can be added using this endpoint.
| Parametre | Açıklama |
|---|---|
| name | (required) Channel name |
| description | (optional) Channel description |
| color | (optional) Channel badge color (HEX) |
| starred | (optional) Star the channel or not (true or false) |
curl --location --request POST 'https://linkplea.se/api/channel/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"name": "New Channel",
"description": "my new channel",
"color": "#000000",
"starred": true
}'$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkplea.se/api/channel/add",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "POST",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
CURLOPT_POSTFIELDS =>
'{
"name": "New Channel",
"description": "my new channel",
"color": "#000000",
"starred": true
}',
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'POST',
'url': 'https://linkplea.se/api/channel/add',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
body: JSON.stringify({
"name": "New Channel",
"description": "my new channel",
"color": "#000000",
"starred": true
}),
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://linkplea.se/api/channel/add"
payload = {
"name": "New Channel",
"description": "my new channel",
"color": "#000000",
"starred": true
}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("POST", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Post, "https://linkplea.se/api/channel/add");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{
"name": "New Channel",
"description": "my new channel",
"color": "#000000",
"starred": true
}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"id": 3,
"name": "New Channel",
"description": "my new channel",
"color": "#000000",
"starred": true
}https://linkplea.se/api/channel/:channelid/assign/:type/:itemid
An item can be assigned to any channel by sending a request with the channel id, item type (links, bio or qr) and item id.
| Parametre | Açıklama |
|---|---|
| :channelid | (required) Channel ID |
| :type | (required) links or bio or qr |
| :itemid | (required) Item ID |
curl --location --request POST 'https://linkplea.se/api/channel/:channelid/assign/:type/:itemid' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkplea.se/api/channel/:channelid/assign/:type/:itemid",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "POST",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'POST',
'url': 'https://linkplea.se/api/channel/:channelid/assign/:type/:itemid',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://linkplea.se/api/channel/:channelid/assign/:type/:itemid"
payload = {}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("POST", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Post, "https://linkplea.se/api/channel/:channelid/assign/:type/:itemid");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"message": "Item successfully added to the channel."
}https://linkplea.se/api/channel/:id/update
To update a channel, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).
| Parametre | Açıklama |
|---|---|
| name | (optional) Channel name |
| description | (optional) Channel description |
| color | (optional) Channel badge color (HEX) |
| starred | (optional) Star the channel or not (true or false) |
curl --location --request PUT 'https://linkplea.se/api/channel/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"name": "Acme Corp",
"description": "channel for items for Acme Corp",
"color": "#FFFFFF",
"starred": false
}'$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkplea.se/api/channel/:id/update",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "PUT",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
CURLOPT_POSTFIELDS =>
'{
"name": "Acme Corp",
"description": "channel for items for Acme Corp",
"color": "#FFFFFF",
"starred": false
}',
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'PUT',
'url': 'https://linkplea.se/api/channel/:id/update',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
body: JSON.stringify({
"name": "Acme Corp",
"description": "channel for items for Acme Corp",
"color": "#FFFFFF",
"starred": false
}),
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://linkplea.se/api/channel/:id/update"
payload = {
"name": "Acme Corp",
"description": "channel for items for Acme Corp",
"color": "#FFFFFF",
"starred": false
}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("PUT", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Put, "https://linkplea.se/api/channel/:id/update");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{
"name": "Acme Corp",
"description": "channel for items for Acme Corp",
"color": "#FFFFFF",
"starred": false
}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"message": "Channel has been updated successfully."
}https://linkplea.se/api/channel/:id/delete
To delete a channel, you need to send a DELETE request. All items will be unassigned as well.
curl --location --request DELETE 'https://linkplea.se/api/channel/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkplea.se/api/channel/:id/delete",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "DELETE",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'DELETE',
'url': 'https://linkplea.se/api/channel/:id/delete',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://linkplea.se/api/channel/:id/delete"
payload = {}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("DELETE", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Delete, "https://linkplea.se/api/channel/:id/delete");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"message": "Channel has been deleted successfully."
}https://linkplea.se/api/domains?limit=2&page=1
To get your branded domains via the API, you can use this endpoint. You can also filter data (See table for more info).
| Parametre | Açıklama |
|---|---|
| limit | (optional) Per page data result |
| page | (optional) Current page request |
curl --location --request GET 'https://linkplea.se/api/domains?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkplea.se/api/domains?limit=2&page=1",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'GET',
'url': 'https://linkplea.se/api/domains?limit=2&page=1',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://linkplea.se/api/domains?limit=2&page=1"
payload = {}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("GET", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Get, "https://linkplea.se/api/domains?limit=2&page=1");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": "0",
"data": {
"result": 2,
"perpage": 2,
"currentpage": 1,
"nextpage": 1,
"maxpage": 1,
"domains": [
{
"id": 1,
"domain": "https:\/\/domain1.com",
"redirectroot": "https:\/\/rootdomain.com",
"redirect404": "https:\/\/rootdomain.com\/404"
},
{
"id": 2,
"domain": "https:\/\/domain2.com",
"redirectroot": "https:\/\/rootdomain2.com",
"redirect404": "https:\/\/rootdomain2.com\/404"
}
]
}
}https://linkplea.se/api/domain/add
A domain can be added using this endpoint. Please make sure the domain is correctly pointed to our server.
| Parametre | Açıklama |
|---|---|
| domain | (required) Branded domain including http or https |
| redirectroot | (optional) Root redirect when someone visits your domain |
| redirect404 | (optional) Custom 404 redirect |
curl --location --request POST 'https://linkplea.se/api/domain/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"domain": "https:\/\/domain1.com",
"redirectroot": "https:\/\/rootdomain.com",
"redirect404": "https:\/\/rootdomain.com\/404"
}'$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkplea.se/api/domain/add",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "POST",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
CURLOPT_POSTFIELDS =>
'{
"domain": "https:\/\/domain1.com",
"redirectroot": "https:\/\/rootdomain.com",
"redirect404": "https:\/\/rootdomain.com\/404"
}',
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'POST',
'url': 'https://linkplea.se/api/domain/add',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
body: JSON.stringify({
"domain": "https:\/\/domain1.com",
"redirectroot": "https:\/\/rootdomain.com",
"redirect404": "https:\/\/rootdomain.com\/404"
}),
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://linkplea.se/api/domain/add"
payload = {
"domain": "https://domain1.com",
"redirectroot": "https://rootdomain.com",
"redirect404": "https://rootdomain.com/404"
}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("POST", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Post, "https://linkplea.se/api/domain/add");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{
"domain": "https:\/\/domain1.com",
"redirectroot": "https:\/\/rootdomain.com",
"redirect404": "https:\/\/rootdomain.com\/404"
}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"id": 1
}https://linkplea.se/api/domain/:id/update
To update a branded domain, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).
| Parametre | Açıklama |
|---|---|
| redirectroot | (optional) Root redirect when someone visits your domain |
| redirect404 | (optional) Custom 404 redirect |
curl --location --request PUT 'https://linkplea.se/api/domain/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"redirectroot": "https:\/\/rootdomain-new.com",
"redirect404": "https:\/\/rootdomain-new.com\/404"
}'$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkplea.se/api/domain/:id/update",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "PUT",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
CURLOPT_POSTFIELDS =>
'{
"redirectroot": "https:\/\/rootdomain-new.com",
"redirect404": "https:\/\/rootdomain-new.com\/404"
}',
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'PUT',
'url': 'https://linkplea.se/api/domain/:id/update',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
body: JSON.stringify({
"redirectroot": "https:\/\/rootdomain-new.com",
"redirect404": "https:\/\/rootdomain-new.com\/404"
}),
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://linkplea.se/api/domain/:id/update"
payload = {
"redirectroot": "https://rootdomain-new.com",
"redirect404": "https://rootdomain-new.com/404"
}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("PUT", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Put, "https://linkplea.se/api/domain/:id/update");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{
"redirectroot": "https:\/\/rootdomain-new.com",
"redirect404": "https:\/\/rootdomain-new.com\/404"
}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"message": "Domain has been updated successfully."
}https://linkplea.se/api/domain/:id/delete
To delete a domain, you need to send a DELETE request.
curl --location --request DELETE 'https://linkplea.se/api/domain/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkplea.se/api/domain/:id/delete",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "DELETE",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'DELETE',
'url': 'https://linkplea.se/api/domain/:id/delete',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://linkplea.se/api/domain/:id/delete"
payload = {}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("DELETE", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Delete, "https://linkplea.se/api/domain/:id/delete");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"message": "Domain has been deleted successfully."
}https://linkplea.se/api/pixels?limit=2&page=1
To get your pixels codes via the API, you can use this endpoint. You can also filter data (See table for more info).
| Parametre | Açıklama |
|---|---|
| limit | (optional) Per page data result |
| page | (optional) Current page request |
curl --location --request GET 'https://linkplea.se/api/pixels?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkplea.se/api/pixels?limit=2&page=1",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'GET',
'url': 'https://linkplea.se/api/pixels?limit=2&page=1',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://linkplea.se/api/pixels?limit=2&page=1"
payload = {}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("GET", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Get, "https://linkplea.se/api/pixels?limit=2&page=1");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": "0",
"data": {
"result": 2,
"perpage": 2,
"currentpage": 1,
"nextpage": 1,
"maxpage": 1,
"pixels": [
{
"id": 1,
"type": "gtmpixel",
"name": "GTM Pixel",
"tag": "GA-123456789",
"date": "2020-11-10 18:00:00"
},
{
"id": 2,
"type": "twitterpixel",
"name": "Twitter Pixel",
"tag": "1234567",
"date": "2020-11-10 18:10:00"
}
]
}
}https://linkplea.se/api/pixel/add
A pixel can be created using this endpoint. You need to send the pixel type and the tag.
| Parametre | Açıklama |
|---|---|
| type | (required) gtmpixel | gapixel | fbpixel | adwordspixel | linkedinpixel | twitterpixel | adrollpixel | quorapixel | pinterest | bing | snapchat | reddit | tiktok |
| name | (required) Custom name for your pixel |
| tag | (required) The tag for the pixel |
curl --location --request POST 'https://linkplea.se/api/pixel/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"type": "gtmpixel",
"name": "My GTM",
"tag": "GTM-ABCDE"
}'$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkplea.se/api/pixel/add",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "POST",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
CURLOPT_POSTFIELDS =>
'{
"type": "gtmpixel",
"name": "My GTM",
"tag": "GTM-ABCDE"
}',
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'POST',
'url': 'https://linkplea.se/api/pixel/add',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
body: JSON.stringify({
"type": "gtmpixel",
"name": "My GTM",
"tag": "GTM-ABCDE"
}),
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://linkplea.se/api/pixel/add"
payload = {
"type": "gtmpixel",
"name": "My GTM",
"tag": "GTM-ABCDE"
}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("POST", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Post, "https://linkplea.se/api/pixel/add");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{
"type": "gtmpixel",
"name": "My GTM",
"tag": "GTM-ABCDE"
}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"id": 1
}https://linkplea.se/api/pixel/:id/update
To update a pixel, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).
| Parametre | Açıklama |
|---|---|
| name | (optional) Custom name for your pixel |
| tag | (required) The tag for the pixel |
curl --location --request PUT 'https://linkplea.se/api/pixel/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"name": "My GTM",
"tag": "GTM-ABCDE"
}'$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkplea.se/api/pixel/:id/update",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "PUT",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
CURLOPT_POSTFIELDS =>
'{
"name": "My GTM",
"tag": "GTM-ABCDE"
}',
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'PUT',
'url': 'https://linkplea.se/api/pixel/:id/update',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
body: JSON.stringify({
"name": "My GTM",
"tag": "GTM-ABCDE"
}),
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://linkplea.se/api/pixel/:id/update"
payload = {
"name": "My GTM",
"tag": "GTM-ABCDE"
}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("PUT", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Put, "https://linkplea.se/api/pixel/:id/update");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{
"name": "My GTM",
"tag": "GTM-ABCDE"
}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"message": "Pixel has been updated successfully."
}https://linkplea.se/api/pixel/:id/delete
To delete a pixel, you need to send a DELETE request.
curl --location --request DELETE 'https://linkplea.se/api/pixel/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkplea.se/api/pixel/:id/delete",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "DELETE",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'DELETE',
'url': 'https://linkplea.se/api/pixel/:id/delete',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://linkplea.se/api/pixel/:id/delete"
payload = {}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("DELETE", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Delete, "https://linkplea.se/api/pixel/:id/delete");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"message": "Pixel has been deleted successfully."
}https://linkplea.se/api/qr?limit=2&page=1
API üzerinden QR kodlarınızı almak için bu uç noktayı kullanabilirsiniz. Ayrıca verileri filtreleyebilirsiniz (Daha fazla bilgi için tabloya bakın).
| Parametre | Açıklama |
|---|---|
| limit | (optional) Per page data result |
| page | (optional) Current page request |
curl --location --request GET 'https://linkplea.se/api/qr?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkplea.se/api/qr?limit=2&page=1",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'GET',
'url': 'https://linkplea.se/api/qr?limit=2&page=1',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://linkplea.se/api/qr?limit=2&page=1"
payload = {}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("GET", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Get, "https://linkplea.se/api/qr?limit=2&page=1");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": "0",
"data": {
"result": 2,
"perpage": 2,
"currentpage": 1,
"nextpage": 1,
"maxpage": 1,
"qrs": [
{
"id": 2,
"link": "https:\/\/linkplea.se\/qr\/a2d5e",
"scans": 0,
"name": "Google",
"date": "2020-11-10 18:01:43"
},
{
"id": 1,
"link": "https:\/\/linkplea.se\/qr\/b9edfe",
"scans": 5,
"name": "Google Canada",
"date": "2020-11-10 18:00:25"
}
]
}
}https://linkplea.se/api/qr/:id
API aracılığıyla tek bir QR kodunun ayrıntılarını almak için bu uç noktayı kullanabilirsiniz.
curl --location --request GET 'https://linkplea.se/api/qr/:id' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkplea.se/api/qr/:id",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'GET',
'url': 'https://linkplea.se/api/qr/:id',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://linkplea.se/api/qr/:id"
payload = {}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("GET", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Get, "https://linkplea.se/api/qr/:id");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"details": {
"id": 1,
"link": "https:\/\/linkplea.se\/qr\/b9edfe",
"scans": 5,
"name": "Google Canada",
"date": "2020-11-10 18:00:25"
},
"data": {
"clicks": 1,
"uniqueClicks": 1,
"topCountries": {
"Unknown": "1"
},
"topReferrers": {
"Direct, email and other": "1"
},
"topBrowsers": {
"Chrome": "1"
},
"topOs": {
"Windows 10": "1"
},
"socialCount": {
"facebook": 0,
"twitter": 0,
"instagram": 0
}
}
}https://linkplea.se/api/qr/add
To create a QR Code, you need to send a valid data in JSON via a POST request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).
| Parametre | Açıklama |
|---|---|
| type | (required) text | vcard | link | email | phone | sms | wifi |
| data | (required) Data to be embedded inside the QR code. The data can be string or array depending on the type |
| background | (optional) RGB color e.g. rgb(255,255,255) |
| foreground | (optional) RGB color e.g. rgb(0,0,0) |
| logo | (optional) Path to the logo either png or jpg |
curl --location --request POST 'https://linkplea.se/api/qr/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"type": "link",
"data": "https:\/\/google.com",
"background": "rgb(255,255,255)",
"foreground": "rgb(0,0,0)",
"logo": "https:\/\/site.com\/logo.png"
}'$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkplea.se/api/qr/add",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "POST",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
CURLOPT_POSTFIELDS =>
'{
"type": "link",
"data": "https:\/\/google.com",
"background": "rgb(255,255,255)",
"foreground": "rgb(0,0,0)",
"logo": "https:\/\/site.com\/logo.png"
}',
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'POST',
'url': 'https://linkplea.se/api/qr/add',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
body: JSON.stringify({
"type": "link",
"data": "https:\/\/google.com",
"background": "rgb(255,255,255)",
"foreground": "rgb(0,0,0)",
"logo": "https:\/\/site.com\/logo.png"
}),
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://linkplea.se/api/qr/add"
payload = {
"type": "link",
"data": "https://google.com",
"background": "rgb(255,255,255)",
"foreground": "rgb(0,0,0)",
"logo": "https://site.com/logo.png"
}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("POST", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Post, "https://linkplea.se/api/qr/add");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{
"type": "link",
"data": "https:\/\/google.com",
"background": "rgb(255,255,255)",
"foreground": "rgb(0,0,0)",
"logo": "https:\/\/site.com\/logo.png"
}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"id": 3,
"link": "https:\/\/linkplea.se\/qr\/a58f79"
}https://linkplea.se/api/qr/:id/update
Bir QR Kodunu güncellemek için, bir PUT isteği aracılığıyla JSON'da geçerli bir veri göndermeniz gerekir. Veriler, aşağıda gösterildiği gibi isteğinizin ham gövdesi olarak gönderilmelidir. Aşağıdaki örnek, gönderebileceğiniz tüm parametreleri gösterir, ancak hepsini göndermeniz gerekmez (Daha fazla bilgi için tabloya bakın).
| Parametre | Açıklama |
|---|---|
| data | (required) Data to be embedded inside the QR code. The data can be string or array depending on the type |
| background | (optional) RGB color e.g. rgb(255,255,255) |
| foreground | (optional) RGB color e.g. rgb(0,0,0) |
| logo | (optional) Path to the logo either png or jpg |
curl --location --request PUT 'https://linkplea.se/api/qr/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"type": "link",
"data": "https:\/\/google.com",
"background": "rgb(255,255,255)",
"foreground": "rgb(0,0,0)",
"logo": "https:\/\/site.com\/logo.png"
}'$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkplea.se/api/qr/:id/update",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "PUT",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
CURLOPT_POSTFIELDS =>
'{
"type": "link",
"data": "https:\/\/google.com",
"background": "rgb(255,255,255)",
"foreground": "rgb(0,0,0)",
"logo": "https:\/\/site.com\/logo.png"
}',
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'PUT',
'url': 'https://linkplea.se/api/qr/:id/update',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
body: JSON.stringify({
"type": "link",
"data": "https:\/\/google.com",
"background": "rgb(255,255,255)",
"foreground": "rgb(0,0,0)",
"logo": "https:\/\/site.com\/logo.png"
}),
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://linkplea.se/api/qr/:id/update"
payload = {
"type": "link",
"data": "https://google.com",
"background": "rgb(255,255,255)",
"foreground": "rgb(0,0,0)",
"logo": "https://site.com/logo.png"
}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("PUT", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Put, "https://linkplea.se/api/qr/:id/update");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{
"type": "link",
"data": "https:\/\/google.com",
"background": "rgb(255,255,255)",
"foreground": "rgb(0,0,0)",
"logo": "https:\/\/site.com\/logo.png"
}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"message": "QR has been updated successfully."
}https://linkplea.se/api/qr/:id/delete
Bir QR kodunu silmek için bir DELETE isteği göndermeniz gerekir.
curl --location --request DELETE 'https://linkplea.se/api/qr/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkplea.se/api/qr/:id/delete",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "DELETE",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'DELETE',
'url': 'https://linkplea.se/api/qr/:id/delete',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://linkplea.se/api/qr/:id/delete"
payload = {}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("DELETE", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Delete, "https://linkplea.se/api/qr/:id/delete");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"message": "QR Code has been deleted successfully."
}https://linkplea.se/api/campaigns?limit=2&page=1
To get your campaigns via the API, you can use this endpoint. You can also filter data (See table for more info).
| Parametre | Açıklama |
|---|---|
| limit | (optional) Per page data result |
| page | (optional) Current page request |
curl --location --request GET 'https://linkplea.se/api/campaigns?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkplea.se/api/campaigns?limit=2&page=1",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'GET',
'url': 'https://linkplea.se/api/campaigns?limit=2&page=1',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://linkplea.se/api/campaigns?limit=2&page=1"
payload = {}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("GET", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Get, "https://linkplea.se/api/campaigns?limit=2&page=1");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": "0",
"data": {
"result": 2,
"perpage": 2,
"currentpage": 1,
"nextpage": 1,
"maxpage": 1,
"campaigns": [
{
"id": 1,
"name": "Sample Campaign",
"public": false,
"rotator": false,
"list": "https:\/\/domain.com\/u\/admin\/list-1"
},
{
"id": 2,
"domain": "Facebook Campaign",
"public": true,
"rotator": "https:\/\/domain.com\/r\/test",
"list": "https:\/\/domain.com\/u\/admin\/test-2"
}
]
}
}https://linkplea.se/api/campaign/add
A campaign can be added using this endpoint.
| Parametre | Açıklama |
|---|---|
| name | (optional) Campaign name |
| slug | (optional) Rotator Slug |
| public | (optional) Access |
curl --location --request POST 'https://linkplea.se/api/campaign/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"name": "New Campaign",
"slug": "new-campaign",
"public": true
}'$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkplea.se/api/campaign/add",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "POST",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
CURLOPT_POSTFIELDS =>
'{
"name": "New Campaign",
"slug": "new-campaign",
"public": true
}',
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'POST',
'url': 'https://linkplea.se/api/campaign/add',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
body: JSON.stringify({
"name": "New Campaign",
"slug": "new-campaign",
"public": true
}),
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://linkplea.se/api/campaign/add"
payload = {
"name": "New Campaign",
"slug": "new-campaign",
"public": true
}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("POST", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Post, "https://linkplea.se/api/campaign/add");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{
"name": "New Campaign",
"slug": "new-campaign",
"public": true
}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"id": 3,
"domain": "New Campaign",
"public": true,
"rotator": "https:\/\/domain.com\/r\/new-campaign",
"list": "https:\/\/domain.com\/u\/admin\/new-campaign-3"
}https://linkplea.se/api/campaign/:campaignid/assign/:linkid
A short link can be assigned to a campaign using this endpoint. The endpoint requires the campaign ID and the short link ID.
curl --location --request POST 'https://linkplea.se/api/campaign/:campaignid/assign/:linkid' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkplea.se/api/campaign/:campaignid/assign/:linkid",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "POST",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'POST',
'url': 'https://linkplea.se/api/campaign/:campaignid/assign/:linkid',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://linkplea.se/api/campaign/:campaignid/assign/:linkid"
payload = {}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("POST", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Post, "https://linkplea.se/api/campaign/:campaignid/assign/:linkid");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"message": "Link successfully added to the campaign."
}https://linkplea.se/api/campaign/:id/update
To update a campaign, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).
| Parametre | Açıklama |
|---|---|
| name | (required) Campaign name |
| slug | (optional) Rotator Slug |
| public | (optional) Access |
curl --location --request PUT 'https://linkplea.se/api/campaign/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"name": "Twitter Campaign",
"slug": "twitter-campaign",
"public": true
}'$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkplea.se/api/campaign/:id/update",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "PUT",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
CURLOPT_POSTFIELDS =>
'{
"name": "Twitter Campaign",
"slug": "twitter-campaign",
"public": true
}',
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'PUT',
'url': 'https://linkplea.se/api/campaign/:id/update',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
body: JSON.stringify({
"name": "Twitter Campaign",
"slug": "twitter-campaign",
"public": true
}),
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://linkplea.se/api/campaign/:id/update"
payload = {
"name": "Twitter Campaign",
"slug": "twitter-campaign",
"public": true
}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("PUT", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Put, "https://linkplea.se/api/campaign/:id/update");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{
"name": "Twitter Campaign",
"slug": "twitter-campaign",
"public": true
}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"id": 3,
"domain": "Twitter Campaign",
"public": true,
"rotator": "https:\/\/domain.com\/r\/twitter-campaign",
"list": "https:\/\/domain.com\/u\/admin\/twitter-campaign-3"
}https://linkplea.se/api/campaign/:id/delete
To delete a campaign, you need to send a DELETE request.
curl --location --request DELETE 'https://linkplea.se/api/campaign/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkplea.se/api/campaign/:id/delete",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "DELETE",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'DELETE',
'url': 'https://linkplea.se/api/campaign/:id/delete',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://linkplea.se/api/campaign/:id/delete"
payload = {}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("DELETE", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Delete, "https://linkplea.se/api/campaign/:id/delete");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"message": "Campaign has been deleted successfully."
}https://linkplea.se/api/splash?limit=2&page=1
To get custom splash pages via the API, you can use this endpoint. You can also filter data (See table for more info).
| Parametre | Açıklama |
|---|---|
| limit | (optional) Per page data result |
| page | (optional) Current page request |
curl --location --request GET 'https://linkplea.se/api/splash?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkplea.se/api/splash?limit=2&page=1",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'GET',
'url': 'https://linkplea.se/api/splash?limit=2&page=1',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://linkplea.se/api/splash?limit=2&page=1"
payload = {}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("GET", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Get, "https://linkplea.se/api/splash?limit=2&page=1");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": "0",
"data": {
"result": 2,
"perpage": 2,
"currentpage": 1,
"nextpage": 1,
"maxpage": 1,
"splash": [
{
"id": 1,
"name": "Product 1 Promo",
"date": "2020-11-10 18:00:00"
},
{
"id": 2,
"name": "Product 2 Promo",
"date": "2020-11-10 18:10:00"
}
]
}
}